We Measure It Precisely

Enquire Now! Please fill all the texts in the fields.

Close

Products

Small Tools Instruments & Data Management

  • Bore Gauges

    • ABSOLUTE Digimatic Bore Gauge 100-160mm / 4-6.5"

      A Mitutoyo ABSOLUTE Digimatic bore gauge designed exclusively for ID measurement. A minimum value holding function provides easy measurement of hole diameter. Up to three sets of master value and upper/lower tolerance values can be memorized and recalled at the push of a button. An analog bar indicator is integrated to enhance ease of reading, especially for GO/±NG judgement. Measurements can be made inside very deep holes by using up to four extension rods.


      Dial Bore Gauge Set 18-150mm

      A set of three Mitutoyo bore gauges designed exclusively for ID measurement. Interchangeable anvils for each gauge enable a wide range of diameter measurement. The dial gauge supplied provides the indication and is attached to a bore gauge as required. High-accuracy measurement is aided by a large grip with a sponge-like structure that reduces heat transfer from the operator’s hand. Optional extension rods can be attached for measuring inside deep holes.


      Dial Bore Gauge 4-6.5"

      A Mitutoyo dial bore gauge designed for ID measurement over a wide range using interchangeable anvils. Tungsten carbide contact points ensure high durability and wear resistance. High-accuracy measurement is aided by a large grip with a sponge-like structure that reduces heat transfer from the operator’s hand. Optional extension rods can be attached for measuring inside deep holes.



      Dial Bore Gauge .4-.7"

      A Mitutoyo dial bore gauge designed exclusively for ID measurement of small holes, using the split-ball principle. The measuring range is covered with interchangeable anvils.




  • Bore Micrometers

      Digimatic Bore Micrometer Set 50-100mm / 2-4"

      A water-resistant Mitutoyo bore gauge set comprising a digital/analogue display unit with interchangeable measuring heads, the appropriate setting rings, and an extension tube for deep-measuring applications. Suitable for measuring to the bottom of blind holes. Titanium-coated contact faces for enhanced durability. Digimatic data output.



      Digimatic Bore Micrometer 87-100mm / 3.5-4"

      A water-resistant Mitutoyo bore gauge comprising a digital/analogue display unit and measuring head. Suitable for measuring to the bottom of blind holes. Titanium-coated contact faces for enhanced durability. Digimatic data output. A ratchet stop guarantees repeatable measurement.




      Bore Micrometer Set 50-100mm

      A non-digital Mitutoyo bore gauge set comprising individual gauges to cover the measuring range, the appropriate setting rings, and an extension tube for deep-measuring applications. Hardened steel contact faces. A ratchet stop guarantees repeatable measurement.




      Bore Micrometer Set 12-20mm

      A non-digital Mitutoyo bore gauge set comprising individual gauges to cover the measuring range, the appropriate setting rings, and an extension tube for deep-measuring applications. Hardened steel contact faces. A ratchet stop guarantees repeatable measurement.
  • Calibration Fixtures


    • Standard Accuracy Check Master 0-1000mm

      A Mitutoyo calibration fixture designed to check the positioning accuracy of machine tools and the measuring accuracy of coordinate measuring machines. Consists of a stack of permanently wrung steel gauge blocks housed in a rigid frame.





    • High Accuracy Check Master 0-600mm

      A Mitutoyo calibration fixture designed to check the positioning accuracy of machine tools and the measuring accuracy of coordinate measuring machines. Consists of a stack of permanently wrung ceramic gauge blocks housed in a rigid frame.

  • Calipers


    • Dial Caliper 0-150mm

      A Mitutoyo dial caliper equipped with standard outside and inside jaws. Hardened stainless steel construction with titanium-coated sliding surfaces for low friction/wear.






    • Nib Jaw Fine Adjustment Vernier Caliper 0-300mm / 0-12"

      A Mitutoyo dual-scale vernier caliper equipped with a fine-adjustment wheel and special nib-style jaws. Hardened stainless steel construction with easy-to-read, satin-chromed scales.






    • ABSOLUTE Digimatic Carbon Fibre Caliper 0-1500mm / 0-60"

      A Mitutoyo waterproof digital caliper suitable for use in the presence of coolant or cutting oil. Lightweight, carbon-fibre construction for easy handling and equipped with plain stainless-steel jaws. ABSOLUTE System scale for error free, high-speed measurement. SPC data output.




    • ABSOLUTE Digimatic Long Jaw Carbon Fibre Caliper 0-600mm

      A Mitutoyo waterproof digital caliper suitable for use in the presence of coolant or cutting oil. Lightweight, carbon-fibre construction for easy handling and equipped with plain, long-style, stainless-steel jaws. ABSOLUTE System scale for error free, high-speed measurement. SPC data output.




    • Long Nib Jaw Vernier Caliper 0-700mm / 0-30"

      A Mitutoyo dual-scale vernier caliper equipped with special long, nib-style jaws. Hardened stainless steel construction with easy-to-read, satin-chromed scales.







    • Inside Point Jaw Caliper 30-300mm

      A Mitutoyo vernier caliper equipped with special pointed jaws for inside measurement only. Hardened stainless steel construction with easy-to-read, satin-chromed scales.







    • ABSOLUTE Digimatic Tube Thickness Caliper 0-150mm / 0-6"

      A Mitutoyo waterproof digital caliper suitable for use in the presence of coolant or cutting oil. Equipped with cylindrical anvil for tube wall-thickness type measurements. ABSOLUTE System scale for error free, high-speed measurement. SPC data output.





    • ABSOLUTE Digimatic Blade Caliper 0-150mm / 0-6"

      A Mitutoyo waterproof digital caliper suitable for use in the presence of coolant or cutting oil. Equipped with special thin-ended jaws for outside measurement. ABSOLUTE System scale for error free, high-speed measurement. SPC data output.





    • ABSOLUTE Digimatic Coolant Proof Caliper 0-200mm / 0-8", Carbide tipped jaws

      A Mitutoyo waterproof digital caliper suitable for use in the presence of coolant or cutting oil. Hardened stainless steel construction and equipped with standard outside and inside jaws. ABSOLUTE System scale for error free, high-speed measurement. SPC data output.




    • ABSOLUTE Digimatic Solar Super Caliper 0-200mm / 0-8"

      A Mitutoyo waterproof, solar powered digital caliper suitable for use in the presence of coolant or cutting oil. Hardened stainless steel construction and equipped with standard outside and inside jaws. No battery needed. ABSOLUTE System scale for error free, high-speed measurement.




    • High Accuracy Vernier Caliper 0-300mm / 0-12"

      A Mitutoyo dual-scale, high accuracy/resolution vernier caliper equipped with standard outside and inside jaws. Hardened stainless steel construction with easy-to-read, satin-chromed scales.






    • Left handed Vernier Caliper 0-150mm

      A Mitutoyo basic vernier caliper equipped with standard outside and inside jaws and designed to be used in the left hand instead of the right. Hardened stainless steel construction with easy-to-read, satin-chromed scales.


  • Caliper Gauges


    • Dial Caliper Gauge 0-10mm

      A Mitutoyo external dial caliper gauge. The caliper is spring loaded and makes point contact at constant measuring force.






    • Digimatic Caliper Gauge 13-43mm

      A Mitutoyo internal digital caliper gauge designed for use as a comparator, to be set up using a setting ring or micrometer. The caliper is spring loaded and makes point contact at constant measuring force.





    • Dial Caliper Gauge 2.0-3.0"

      A Mitutoyo internal dial caliper gauge designed for use as a comparator, to be set up using a setting ring or micrometer. The caliper is spring loaded and makes point contact at constant measuring force.





    • Dial Caliper Gauge 30-55mm

      A Mitutoyo internal dial caliper gauge designed for use as a comparator, to be set up using a setting ring or micrometer. The caliper is spring loaded and makes point contact at constant measuring force.


  • Data Cables


    • SPC Cable (L-shape, 2m)

      A Mitutoyo SPC data cable with right-angled connector (F) to suit compatible measuring tools.







    • SPC Waterproof U-WAVE Cable (160mm)

      A Mitutoyo U-WAVE SPC data cable with waterproof straight connector (G) to suit compatible measuring tools. Connects a measuring tool fitted with a data socket as shown in the photograph to a U-WAVE transmitter.






    • SPC U-WAVE Data Cable, round

      A Mitutoyo U-WAVE footswitch SPC data cable with 6-pin round connector (E) to suit compatible measuring tools. Connects a measuring tool fitted with a data socket as shown in the photograph to a U-WAVE transmitter and footswitch.


  • Data Management



    • Single-Function Multi-Point Display Unit

      A low cost, Mitutoyo modular display unit with GO/NG judgement function offers a large LED display for Digimatic output measuring instruments. The bright LED readout is ideal for low-light situations or when the scale unit must be positioned where its own display cannot be viewed directly.




    • U-Wave Receiver

      The Mitutoyo U-WAVE system enables easy wireless data communication from a measuring tool to a PC using the Digimatic protocol. Measurement workability is improved by eliminating the long and cumbersome data cables usually required and the user-friendly interface allows data to be loaded into any software product that accepts keyboard input, such as Excel or Notepad.




    • 8 Port Digimatic Multiplexer

      Mitutoyo Digimatic Multiplexers are used to concentrate streams of measurement data from several instruments into a single stream feeding via RS232/USB into a dedicated processor or PC for storage and processing.





    • MeasurLink 7 Real-Time Professional 3D Edition

      Mitutoyo's MeasurLink 7 Real-Time Professional 3D Edition is designed for customers who wish to collect data using the Hoops 3D graphics view, in addition to all features offered by MeasurLink 7 Real-Time Professional Edition. Hoops 3D files can be exported from most CAD systems and provides the operator with a real view of the part. Camera angle and position can be saved for each characteristic providing for an intuitive prompted guided sequencing for the inspector. Supported data sources include keyboard, RS232, and USB devices, native Mitutoyo integration (DDE) ASCII and QMD (xml-based) file import.




    • U-Wave Wireless Transmitter inc Data Cable (Buzzer model)

      The Mitutoyo U-WAVE system enables easy wireless data communication from a measuring tool to a PC using the Digimatic protocol. Measurement workability is improved by eliminating the long and cumbersome data cables usually required and the user-friendly interface allows data to be loaded into any software product that accepts keyboard input, such as Excel* or Notepad.



    • DP1-VR Digimatic Mini Data Processor

      The Mitutoyo versatile DP1-VR printer not only prints measurement data, but performs a variety of statistical analyses, draws histograms and D charts and also to performs complicated operations for X bar R control charts.

  • Depth Gauges


    • Dial Depth Gauge 0-150mm

      A Mitutoyo dial depth gauge with a 100mm base and fine adjustment. Hardened stainless steel construction.





    • ABSOLUTE Digimatic Depth Gauge 0-200mm / 0-8"

      A Mitutoyo depth gauge using stackable extension rods and a 0.5”-stroke indicator to cover a wide measuring range, with a lifting lever for rapid operation. The 2.5” base is made from tool steel, hardened and ground with a micro-lapped reference surface.






    • Dial Type Depth Gauge 0-200mm

      A Mitutoyo depth gauge using stackable extension rods and a 10mm-stroke dial indicator to cover a wide measuring range, with a lifting lever for rapid operation. The 101mm base is made from tool steel, hardened and ground with a micro-lapped reference surface.






    • ABSOLUTE Digimatic Depth Gauge 0-300mm / 0-12"

      A Mitutoyo digital depth gauge with a 3.93" base. Hardened stainless steel construction. ABSOLUTE System scale for error free, high-speed measurement. SPC data output.


  • Depth Micrometers


    • Fixed Rod Depth Micrometer 0-25mm

      A Mitutoyo non-digital depth micrometer. The 63mm base is made from tool steel, hardened and ground with a micro-lapped reference surface.






    • Fixed Rod Depth Micrometer 0-25mm

      A Mitutoyo non-digital depth micrometer. The 101mm base is made from tool steel, hardened and ground with a micro-lapped reference surface.






    • Interchangeable Rod Depth Micrometer 0-150mm

      A non-digital Mitutoyo depth micrometer using interchangeable measuring rods to cover a wide measuring range. The 60mm base is made from tool steel, hardened and ground with a micro-lapped reference surface.


  • Dial Snap Gauges


    • Dial Snap Gauge 0-25mm

      A Mitutoyo rapid-retraction-anvil snap meter equipped with a high resolution dial indicator.








    • Dial Snap Gauge 0-25mm

      A Mitutoyo dial snap gauge designed for quick GO/NG judgement of diameters of cylinders and shafts. Anvils are chamfered for easy workpiece insertion. The dial indicator is optional, enabling the user to choose from the wide range available to best suit the application.
  • Engineers' Squares


    • Engineers Precision Square 100 x 70mm

      A Mitutoyo engineers square, standard type with contact surfaces hardened and precision ground.






    • Engineers Precision Square 100 x 70mm with Bevelled Edge

      A Mitutoyo engineers square, bevelled edge, stockless type with contact surfaces hardened and precision ground.






    • Combination Square Set 300mm / 12"e

      Theses three Mitutoyo combination square heads are attachable to the satin chrome plated rule (blade), allowing versatile measurements on various types of workpieces.

  • Feeler Gauges


    • Feeler Gauge 0.05-1mm, 20 leaves

      A set of Mitutoyo feeler gauges consisting of 20 leaves with sizes clearly marked. Leaves may be removed from holder. Hardened and tempered tool steel.






    • Feeler Gauge 0.05-0.8mm, 10 leaves

      A set of Mitutoyo feeler gauges consisting of ten leaves with sizes clearly marked. Leaves may be removed from holder. Hardened and tempered tool steel.
  • Flats and Parallels


    • Metric Optical Parallel Set

      This Mitutoyo Optical Parallel flat is for testing flatness and parallelism of the measuring faces of metric outside micrometers.






    • 45mm Optical Flat

      A circular Mitutoyo optical flat with one surface accurately polished for inspecting the flatness of gauge block or platen reference surfaces, micrometer contact faces or any other very flat surface of high reflectivity.


  • Gauge Blocks


    • 5.5mm Steel Gauge Block, Grade 1

      A rectangular Mitutoyo gauge block made from special tool steel, heat-treated for resistance to wear and secular change in length.






    • 100.0mm Steel Gauge Block, Grade 1

      A rectangular Mitutoyo gauge block made from special tool steel, heat-treated for resistance to wear and secular change in length.







    • 103-piece Steel Gauge Block Set, Metric, Grade 0

      A Mitutoyo gauge block set with all blocks made of special tool steel, heat treated and aged to give good wear resistance and small secular change. Excellent inter-set wringing properties and will wring to optical flats or gauge blocks made of any other material.





    • Steel Micrometer Gauge Block Set, Metric, Grade 0

      A Mitutoyo outside micrometer test set comprising ten gauge blocks for testing accuracy throughout measuring stroke and an optical parallel for testing contact face flatness and parallelism.





    • 1mm Ceramic Wear Blocks, Metric, Grade 0 (2pcs)

      A pair of thin, wear resistant Mitutoyo gauge blocks designed to form the end (or ends) of a stack of blocks to absorb normal wear and tear. These are especially economic when the application involves abrasive contact with the end (or ends) of a stack, so that instead of wearing a large proportion of the blocks in a whole set, the wear is largely confined to a pair of relatively inexpensive, and therefore easily replaceable, gauge blocks.
  • Granite Surface Plates


    • Granite Surface Plate 300 x 300 x 65mm Grade 0

      A Mitutoyo surface plate made from fine-grained black granite. This material has many advantages compared to cast iron in this application, such as being non-magnetic, rustless, twice as hard, non-burr-forming and not prone to stickiness.





    • Granite Surface Plate 1200 x 600 x 100mm Grade 0 with stand

      A Mitutoyo surface plate made from fine-grained black granite. This material has many advantages compared to cast iron in this application, such as being non-magnetic, rustless, twice as hard, non-burr-forming and not prone to stickiness. Supplied with a robust steel stand.
  • Height Gauges


    • High-Performance QM Height Gauge 0-350mm / 0-14" with built-in air suspension

      A Mitutoyo digital height gauge featuring built-in measuring functions and very high measuring accuracy. Easy-to-read display with a simple, ergonomically designed measurement control panel with user friendly, single-key operation. Manual height adjustment by coarse/fine elevation wheel. Built-in air suspension operating from internal batteries enables smooth and light movement on a surface plate. ABSOLUTE linear encoder eliminates need to reset zero at switch-on. Digimatic and USB data output.



    • Dial Height Gauge 0-12"

      A Mitutoyo dial/mechanical-digit-counter height gauge, twin column design. Two separate counters provide independently settable up/down measurement capability, with the dial gauge indicating the last decimal fractions.





    • Double Scale Vernier Height Gauge 0-450mm / 0-18"

      A Mitutoyo vernier height gauge with a dual unit, adjustable main scale. Stainless steel construction with easy-to-read, satin-chromed scales.






    • Linear Height High Performance Height Gauge 0-600mm / 0-24"

      A semi-automatic, programmable Mitutoyo height gauge with full/semi-floating air-cushion suspension. Basic statistical functions are built in to the keypad/LCD controller and data output capability provides the option of evaluating measurement data externally with SPC software on a PC. An extensive range of accessories extends the application range.

  • Indicators


    • Large Diameter Dial Indicator 1" (.1")

      A Mitutoyo multi-revolution indicator suited to comparison measurement applications.







    • One Revolution Back Plunger Dial Indicator 1mm

      A Mitutoyo shockproof, one-revolution, back-plunger type balanced-dial indicator suited to comparison measurement applications on measuring jigs and similar.






    • Back Plunger Dial Indicator 5mm (1mm)

      A Mitutoyo multi-revolution, back-plunger type indicator suited to measurement applications on measuring jigs and similar.






    • Lever Indicator 0.5mm

      A Mitutoyo versatile anti-magnetic type lever indicator (or dial test indicator, DTI) suited to alignment operations on machine tools and similar applications. This indicator automatically adapts to the required measuring direction on contact, and the jewelled movement provides lowest friction and stiction for smooth and precise operation. Supplied with a basic set of mounting accessories.





    • Long Stroke Dial Indicator 1" (.1")

      A Mitutoyo multi-revolution dial indicator suited to general measurement applications. The jewelled movement provides lowest friction and stiction for smooth and precise operation and the dual-reading scale aids measurement in both directions..





    • ABSOLUTE Digimatic Calculating Indicator ID-C 12.7mm / .5"

      A Mitutoyo digital indicator featuring a calculation function enabling calculation of one dimension from measurement of another, using a jig specially designed for the purpose. ABSOLUTE System scale for error free, high-speed measurement. Functionality includes displaying the result of an internal calculation based on plunger displacement (according to a user-defined formula), and tolerance judgement. SPC data output.




    • Adjustable-Hand Dial Indicator 10mm (1mm)

      A Mitutoyo multi-revolution dial indicator suited to general measurement applications where an ability to adjust the position of the hands without affecting the position of the plunger is required. The dual-reading scale aids measurement in both directions.





    • Compact Dial Indicator .1" (.04")

      A Mitutoyo multi-revolution dial indicator suited to comparison measurement applications.

  • Inside Micrometers


    • Interchangeable Rod Inside Micrometer 25-50mm

      A Mitutoyo inside micrometer covering a range of measurement by using an interchangeable measuring rod with a spacing collar. The micrometer head is satin-chrome finished.






    • Extension Tube Inside Micrometer 1000-4000mm

      A Mitutoyo inside micrometer covering a range of measurement by using a set of interchangeable extension tubes that can be used singly or in combination. The micrometer head is satin-chrome finished..





    • Digimatic Extension Tube Inside Micrometer 200-2000mm

      A Mitutoyo digital inside micrometer covering a range of measurement by using a set of interchangeable extension tubes that can be used singly or in combination. The micrometer head is satin-chrome finished.


  • Micrometers


    • Paper Thickness Micrometer 0-1"

      A Mitutoyo non-digital micrometer provided with disc-ended non-rotating spindle and anvil to enable measurement of paper thickness free of any twisting action. A ratchet stop guarantees repeatable measurement.





    • Point Micrometer 0-1" 30 degree tip

      A Mitutoyo non-digital micrometer provided with pointed spindle and anvil to enable measurement within curved, slotted features, such as drilling-bit web thicknesses. A ratchet stop guarantees repeatable measurement.





    • Digimatic Crimp Height Micrometer 0-20mm

      A Mitutoyo waterproof digital micrometer suitable for use in the presence of coolant or cutting oil. Spindle is pointed to enable measurement of the crimp height of electrical contacts. The highly stable frame incorporates a heat shield to preserve accuracy over extended measuring sessions. A ratchet stop guarantees repeatable measurement. Digimatic data output.



    • 3 Flute V-Anvil Micrometer 10-25mm

      A Mitutoyo non-digital micrometer provided with a V-shaped anvil to enable measurement of 3-flute cutting tools, such as taps and reamers. A ratchet stop guarantees repeatable measurement.





    • Non-Rotating Spindle Micrometer 0-25mm

      A Mitutoyo non-digital micrometer provided with disc-ended spindle and anvil to enable measurement of shrouded features, such as gear teeth. A ratchet stop guarantees repeatable measurement.





    • Digimatic Sheet Metal Micrometer 0-25mm / 0-1"

      A Mitutoyo waterproof digital micrometer suitable for use in the presence of coolant or cutting oil. The deep frame enables measurement of sheet metal thickness farther from the edge of a sheet than is possible with a standard micrometer. A ratchet stop guarantees repeatable measurement. Digimatic data output.





    • Limit Micrometer 0-25mm

      A dual, non-digital Mitutoyo micrometer arranged as a GO/NG adjustable snap gauge, able to test component size against upper and lower tolerance limits simultaneously.






    • Indicating Micrometer 50-75mm

      IA Mitutoyo non-digital, rapid-retraction-anvil indicating micrometer equipped with a high resolution dial indicator.






    • Blade Micrometer 150-175mm

      A Mitutoyo non-digital micrometer provided with blade-ended non-rotating spindle and anvil to enable measurement of shrouded features, such as grooves and keyways. A ratchet stop guarantees repeatable measurement.





    • ABSOLUTE Digimatic Quickmike Micrometer 50-80mm / 2-3.2"

      An extremely rapid action, water-resistant Mitutoyo digital micrometer that enables measurements to be made many times faster than a standard micrometer. ABSOLUTE System scale for error free, high-speed measurement. The frame incorporates a heat shield to preserve accuracy over extended measuring sessions. A ratchet thimble guarantees repeatable measurement. SPC data output.



    • Ratchet Thimble Micrometer 25-50mm with 0.001mm Graduation

      A Mitutoyo non-digital micrometer with a combined ratchet thimble/speeder to guarantee repeatable measurement. The highly stable frame incorporates a heat shield to preserve accuracy over extended measuring sessions. High resolution provided by a vernier scale on sleeve.

  • Setting Standards


    • Setting Standard 25mm

      A Mitutoyo precision length standard for accurately setting a micrometer at the start or end of its measuring range. Can also be used for setting other types of continuous-scale measuring instruments at a certain point within the measuring range when wishing to use the narrow-range accuracy capabilities of that instrument.





    • Setting Standard 24"

      A Mitutoyo precision length standard for accurately setting a micrometer at the start or end of its measuring range. Can also be used for setting other types of continuous-scale measuring instruments at a certain point within the measuring range when wishing to use the narrow-range accuracy capabilities of that instrument.





    • Setting Standard 200mm

      A Mitutoyo precision length standard for accurately setting a micrometer at the start or end of its measuring range. Can also be used for setting other types of continuous-scale measuring instruments at a certain point within the measuring range when wishing to use the narrow-range accuracy capabilities of that instrument..





    • Setting Standard 75mm

      A Mitutoyo precision length standard for accurately setting a micrometer at the start or end of its measuring range. Can also be used for setting other types of continuous-scale measuring instruments at a certain point within the measuring range when wishing to use the narrow-range accuracy capabilities of that instrument.





    • Setting Standard 1"

      A Mitutoyo precision length standard for accurately setting a micrometer at the start or end of its measuring range. Can also be used for setting other types of continuous-scale measuring instruments at a certain point within the measuring range when wishing to use the narrow-range accuracy capabilities of that instrument.





    • Setting Standard 150mm

      A Mitutoyo precision length standard for accurately setting a micrometer at the start or end of its measuring range. Can also be used for setting other types of continuous-scale measuring instruments at a certain point within the measuring range when wishing to use the narrow-range accuracy capabilities of that instrument.



  • Steel Rules


    • Wide Rigid Steel Rule 150mm

      A Mitutoyo stainless steel rule, hardened and tempered. Clear graduations on satin-chrome finish.






    • Semi-Flexible Steel Rule 200mm/8"

      A Mitutoyo stainless steel rule, hardened and tempered. Clear graduations on satin-chrome finish.






    • Wide Rigid Steel Rule 6"

      A Mitutoyo stainless steel rule, hardened and tempered. Clear graduations on satin-chrome finish.






    • Fully Flexible Steel Rule 600mm/24"

      A Mitutoyo stainless steel rule, hardened and tempered. Clear graduations on satin-chrome finish.






    • Fully Flexible Steel Rule 6"

      A Mitutoyo stainless steel rule, hardened and tempered. Clear graduations on satin-chrome finish.






    • Wide Rigid Steel Rule 150mm/ 6"

      A Mitutoyo stainless steel rule, hardened and tempered. Clear graduations on satin-chrome finish.






    • Fully Flexible Steel Rule 150mm

      A Mitutoyo stainless steel rule, hardened and tempered. Clear graduations on satin-chrome finish.






    • Fully Flexible Steel Rule 300mm/12"

      A Mitutoyo stainless steel rule, hardened and tempered. Clear graduations on satin-chrome finish.

  • Setting Rings


    • Setting Ring 7.0"

      A Mitutoyo steel calibration artefact for quick and accurate setting of dial bore gauges, Holtest gauges, and inside micrometers. The actual calibration value for the diameter is marked on each ring.






    • Setting Ring .1"

      A Mitutoyo steel calibration artefact for quick and accurate setting of dial bore gauges, Holtest gauges, and inside micrometers. The actual calibration value for the diameter is marked on each ring.






    • Setting Ring .16"

      A Mitutoyo steel calibration artefact for quick and accurate setting of dial bore gauges, Holtest gauges, and inside micrometers. The actual calibration value for the diameter is marked on each ring.






    • Setting Ring .35"

      A Mitutoyo steel calibration artefact for quick and accurate setting of dial bore gauges, Holtest gauges, and inside micrometers. The actual calibration value for the diameter is marked on each ring.






    • Setting Ring .5"

      A Mitutoyo steel calibration artefact for quick and accurate setting of dial bore gauges, Holtest gauges, and inside micrometers. The actual calibration value for the diameter is marked on each ring.






    • Setting Ring 6.0"

      A Mitutoyo steel calibration artefact for quick and accurate setting of dial bore gauges, Holtest gauges, and inside micrometers. The actual calibration value for the diameter is marked on each ring.






    • Setting Ring 30mm

      A Mitutoyo steel calibration artefact for quick and accurate setting of dial bore gauges, Holtest gauges, and inside micrometers. The actual calibration value for the diameter is marked on each ring.






    • Setting Ring 70mm

      A Mitutoyo steel calibration artefact for quick and accurate setting of dial bore gauges, Holtest gauges, and inside micrometers. The actual calibration value for the diameter is marked on each ring.




  • Straight Edges


    • Straight Edge 50mm

      A Mitutoyo tool designed to test straightness by holding against a backlighted surface. The degree of straightness of the tested surface is qualitatively indicated by the amount of light that can be seen under the straight edge reference edge, which is hardened, ground and micro-lapped.





    • Straight Edge 150mm

      A Mitutoyo tool designed to test straightness by holding against a backlighted surface. The degree of straightness of the tested surface is qualitatively indicated by the amount of light that can be seen under the straight edge reference edge, which is hardened, ground and micro-lapped.





    • Straight Edge 200mm

      A Mitutoyo tool designed to test straightness by holding against a backlighted surface. The degree of straightness of the tested surface is qualitatively indicated by the amount of light that can be seen under the straight edge reference edge, which is hardened, ground and micro-lapped.





    • Straight Edge 300mm

      A Mitutoyo tool designed to test straightness by holding against a backlighted surface. The degree of straightness of the tested surface is qualitatively indicated by the amount of light that can be seen under the straight edge reference edge, which is hardened, ground and micro-lapped.





      Straight Edge 500mm

      A Mitutoyo tool designed to test straightness by holding against a backlighted surface. The degree of straightness of the tested surface is qualitatively indicated by the amount of light that can be seen under the straight edge reference edge, which is hardened, ground and micro-lapped.



  • Stands and Workholdings


    • Mini Magnetic Stand

      A small Mitutoyo stand that uses a permanent magnet to mount onto flat iron or steel surfaces. Useful for holding dial indicators or dial test indicators during alignment operations.





    • Vertical Micrometer Stand

      These Mitutoyo stands are designed to allow bench-top use of hand micrometers or other gauges which have frames suitable for gripping by the clamp.







    • Adjustable Angle Micrometer Stand

      These Mitutoyo stands are designed to allow bench-top use of hand micrometers or other gauges which have frames suitable for gripping by the clamp.







    • Precision Bench Centres

      A Mitutoyo fixture for mounting and testing cylindrical components that are centred in each end. A stand is provided for mounting an indicator (optional) for making measurements of, typically, runout, cylindricity and concentricity.





    • Comparator Stand 275mm

      Mitutoyo Comparator Stands consists of a very stable, cast-iron base and upright column with a mounting bracket that features fine adjustment. The grid type anvil prevents very flat workpieces from wringing to it.





    • Mini Jack 60-75mm

      A Mitutoyo height-adjustable support for accurate levelling of small machines, surface plates, and similar equipment. Easily adjusted under heavy load.



  • Micrometer Heads


    • Mechanical Counter Micrometer Head 25mm

      A mechanical-digit Mitutoyo micrometer head with plain Ø10mm stem and flat tungsten-carbide spindle tip. Ratchet stop.







    • Non-rotating Spindle Type Micrometer Head 15mm

      A non-digital, high resolution Mitutoyo micrometer head with plain Ø9.5mm stem and non-rotating spindle fitted with flat tungsten-carbide tip.






    • Differential Screw Translator Micrometer Head 13mm

      A dual thimble, high/low resolution, non-digital Mitutoyo micrometer head with M9.5 clamp-nut stem and light-duty Ø5mm non-rotating spindle with spherically radiused tip.







    • Large Thimble Micrometer Head 25mm

      A high resolution, bidirectionally graduated large-thimble, non-digital Mitutoyo micrometer head with plain Ø12mm stem and heavy-duty Ø8mm spindle fitted with flat tungsten-carbide tip.






    • XY-Stage Micrometer Head 25mm

      A high resolution, X-axis style bidirectionally graduated, large-thimble, non-digital Mitutoyo micrometer head with plain Ø18mm stem and heavy-duty Ø8mm spindle fitted with spherically radiused tungsten-carbide tip.






    • Digimatic Micrometer Head 25mm / 1"

      A Mitutoyo digital micrometer head with with M9.5 clamp-nut stem and flat spindle tip. Ratchet stop. Digimatic data output.






    • Digimatic Micrometer Head 50mm

      A Mitutoyo digital, non-rotating spindle micrometer head with plain Ø18mm stem and flat spindle tip. The display is rotatable for viewing convenience. Ratchet stop. Digimatic data output.






    • Zero-adjustable Micrometer Head 13mm

      A small, standard, zero-adjustable non-digital Mitutoyo micrometer head with plain 9.5mm stem and flat spindle tip.




  • Thickness Gauges


    • Dial Thickness Gauge 0-10mm

      A Mitutoyo dial-gauge based instrument designed for quick and efficient measurement of small dimensions. Ideally suited for measuring the thickness of paper, film, wire, sheet metal and similar materials. The convenient grip handle, thumb trigger and spring-loaded plunger make the instrument easy to use.




    • ABSOLUTE Digimatic Thickness Gauge 0-10mm / 0-.4"

      A Mitutoyo digital-indicator based instrument designed for quick and efficient measurement of small dimensions. Ideally suited for measuring the thickness of paper, film, sheet metal and similar as the deep throat design enables measurement of sheet material at a further distance from the edge than is possible with the standard type. The convenient grip handle, thumb trigger and spring-loaded plunger make the instrument easy to use.




    • Dial Thickness Gauge 0-10mm

      A Mitutoyo dial-gauge based instrument designed for quick and efficient measurement of small dimensions. The anvil is reversible to allow a radiused contact face to be brought into use opposite the flat plunger face, which makes the instrument suitable for measuring components with a concave surface, such as lenses. The convenient grip handle, thumb trigger and spring-loaded plunger make the instrument easy to use.




    • Dial Thickness Gauge 0-10mm

      A Mitutoyo dial-gauge based instrument designed for quick and efficient measurement of small dimensions. Ideally suited for measuring the thickness of paper, film, wire, sheet metal and similar materials. The convenient grip handle, thumb trigger and spring-loaded plunger make the instrument easy to use.




    • Quick Mini 0-12mm/ 0-.5"

      A Mitutoyo compact comparator designed for carrying convience, it is highly suitable for quick dimensional inspection of paper, leather, wires, plastic parts etc. The digital display provides error -free reading with 0.01mm resolution.






    • ABSOLUTE Digimatic Thickness Gauge 0-12mm / 0-.47"

      A Mitutoyo high-resolution digital-indicator based instrument designed for quick and efficient measurement of small dimensions. Ideally suited for precise measurement of the thickness of paper, film, wire, sheet metal and similar materials. The convenient grip handle, thumb trigger and spring-loaded plunger make the instrument easy to use.


  • Protractors


    • Digimatic Universal Protractor 6"

      A Mitutoyo digital universal protractor for precise reading of angles on workpiece features, or setting angles on machine tools. Hardened stainless steel construction. Digimatic data output.





    • Digimatic Protractor Pro 360

      A digital Mitutoyo protractor/level designed for making angle measurements in the vertical plane. The instrument can be zeroed at any angular position and directly indicates the angle between the stock and that position when in use to a resolution of 0.1 degree. When zeroed at the horizontal, readings are provided in the same manner as a spirit level, but with the advantage of a range extending all the way to the vertical.




    • Universal Bevel Protractor 150mm

      A Mitutoyo vernier protractor with magnifying glass for precise reading of angles on workpiece features, or setting angles on machine tools. Hardened stainless steel construction.
  • Accessories


    • Centre Probe (with Metric Holding Bar)

      This Mitutoyo centre probe allows quick measurement of centre to centre distance between holes. Measurable hole diameters 1 – 38mm/.040-1.50”.






    • Extension Rod 500mm / 20"

      A Mitutoyo accessory designed to assist in deep-hole measurement by extending the reach of a standard bore gauge by 500mm. Note that when several extension rods are joined together there is the possibility of small errors arising from the extra joints involved. Therefore it is good practice not to connect more than 2 rods to a bore gauge at any one time. If possible use a single, longer extension rod rather than several shorter ones. The bore gauge should be used in the vertical orientation with this rod, and accuracy and satisfactory operation should be confirmed after connection.



    • Extension Rod 125mm / 5"

      A Mitutoyo accessory designed to assist in deep-hole measurement by extending the reach of a standard bore gauge by 125mm. Note that when several extension rods are joined together there is the possibility of small errors arising from the extra joints involved. Therefore it is good practice not to connect more than 2 rods to a bore gauge at any one time. If possible use a single, longer extension rod rather than several shorter ones. Satisfactory operation should be confirmed after connecting this rod to the gauge.



    • Extension Rod 10mm

      Mitutoyo 10mm extension rod. Metric 2.5x5mm thread for use with Metric Indicators and Series 7 Dial Depth Gauges. Material: Steel.






    • Extension Rod 1"

      A Mitutoyo Imperial 4-48 UNF thread for use with Imperial Indicators, and Series 7 Depth Gauges. Material: Steel.






    • Small Hole Gauge Set .125-.5"

      A set of four Mitutoyo transfer gauges that enables the diameters of holes and bores to be measured with a 0-25mm (0-1”) outside micrometer. In operation the two sprung leaves of a gauge are expanded into light contact with a hole wall by using the knurled rotary adjuster on the end of the handle, after which the gauge is carefully withdrawn so that the dimension across the leaves, which is now the same as the hole diameter, can be measured.



    • Ball Attachment 5mm

      A Mitutoyo ball attachment for imperial micrometers up to 150mm. It fits on the anvil to form a spherical contact surface to enable measurement on concave surfaces, such as the inside of pipes.






    • Input Tool - USB Model

      The Mitutoyo input tool is an interface that converts measurement data to keyboard signals for sending to a PC, enabling you to easily input data from a Mitutoyo measuring instrument, equipped with Digimatic output, directly to cells in off-the-shelf spreadsheet software such as Excel.




    • 75mm Depth Base Attachment

      Mitutoyo Depth Base Attachment for use with 100mm/4", 150mm/6" and 200mm/8" calipers.

     

Authority Distribution

Our Products

More than a decade ago Waters Corporation, the scientific laboratory instrument and software manufacturer, started introducing high-end metrology equipment to its several sites in the South Manchester area to help cope with the ..
Read More